







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Refacing Kitchen Cabinets Costs in Paradise, NV
Refacing your kitchen cabinets in Paradise runs roughly $4,000 to $13,000 for a typical 10-15 linear-foot tract-home kitchen, and the honest answer is that the number can move once we look inside the boxes. Most quotes you’ll get over the phone skip the step that decides it: checking the substrate. Call (855) 596-7029 and we’ll walk you through what usually drives the price here, free of charge.
Paradise is a township of villages and resort corridors rather than a city with its own hall, so construction here answers to Clark County. And because much of the housing stock is 1990s-2000s stucco-and-tile tract homes built for desert heat, kitchen work here skews toward remodels of builder-grade kitchens, not historic restoration. That matters for refacing more than most cost guides admit.
Key takeaways
- Typical Paradise refacing job: $4,000-$13,000, depending on door profile, drawer construction, and how sound your 1990s-2000s boxes are.
- About one in three tract kitchens we inspect shows some substrate swelling from years of cooking steam in low-ventilation layouts.
- Any scope or price change gets written out in a change order before a single door comes off.
- Refacing itself usually needs no permit; undercabinet lighting or a moved sink does, and we pull those.

Why Paradise Quotes Come in Wrong Before the First Measurement
Most refacing quotes assume your cabinet boxes are solid enough to bond new veneer to with minimal prep. That assumption holds in a lot of places. In the builder-grade frameless boxes that fill most of this zip code, it’s wrong about one job in three.
Here’s what we find. Desert kitchens run long stretches over 100°F, then the AC kicks the indoor humidity around. Add years of steam from a cooktop with a weak or recirculating hood, and the MDF and particleboard in the box walls and shelves can delaminate or swell at the edges. Bond new veneer to that and it fails within a couple of years, usually right where the cabinet gets the most heat.
So the substrate inspection isn’t a sales step. It’s the step that decides whether refacing is even the right call for your kitchen. A quick check of shelf edges, the underside of upper boxes, and the areas above the range tells us plenty. If the boxes are sound, refacing is a great value. If they’re not, we tell you plainly and price the fix in writing.
Three Price Tiers, and What Moves You Between Them
For a typical 10-15 linear-foot Paradise tract kitchen, here’s how the numbers tend to shake out. These are the ranges we quote and stand behind.
| Scenario | What it includes | Typical cost |
|---|---|---|
| Low | Sound substrate, standard door profile, thermofoil or laminate veneer, existing drawer boxes reused | $4,000-$6,500 |
| Mid | Minor substrate repair, KraftMaid door profiles, new real-wood dovetail drawers, new hardware | $6,500-$9,500 |
| High | Substrate repair or partial box replacement, premium KraftMaid components, matching crown and filler work, undercabinet lighting permit | $9,500-$13,000 |
What pushes you from one tier to the next is almost always the boxes, the drawer construction, and whether the project touches electrical or plumbing. Door style and finish play a part, but the hidden substrate is the wildcard.
If refacing turns out to be the wrong fit because the boxes are too far gone, that’s a different conversation, and we’ll show you the numbers for a full Kitchen Remodeling in Paradise so you can compare. We also break down cabinet and countertop pricing separately on our Kitchen Remodeling page if you want to line-item a bigger project.

KraftMaid Components vs. the Mystery-Brand Van
Budget refacers often show up with thermofoil doors from a brand you can’t look up. Thermofoil is a vinyl skin over MDF, and it has a real weakness in desert kitchens: at high cabinet temperatures, especially above a range or a wall oven, it can peel and bubble. In a Paradise kitchen that bakes through summer, that’s a gamble.
We install KraftMaid refacing components, which means real wood dovetail drawers and matching door profiles you can research before you commit. You’re getting materials with a name on them, not a mystery brand off a van. When we reface, the parts we put on your boxes are parts you can verify.
The same material logic shows up across every trade we touch. We install vinyl and aluminum fencing in Paradise from names like Bufftech and ActiveYards because plastic that fades in UV is plastic that fades in UV, and hardscape work runs on Belgard pavers. When we quote a brand, it’s one you can look up.
Where Permits Fit Into a Refacing Job
Most cabinet refacing in Paradise doesn’t require a permit. It’s a finish upgrade, not structural work. But plenty of refacing projects grow a little: undercabinet lighting, a new outlet for a coffee station, or a relocated sink line. The moment a project touches electrical or plumbing, Clark County requires permits for those sub-trades.
We pull every one of them. The last contractor many homeowners used told them permits were optional, and that’s a problem that shows up at resale or at inspection. On every eligible job, permits get pulled and inspections get signed. The permit inspector works for you, not for us.
There’s a local wrinkle worth knowing. Near the airport and the resort corridor, height and obstruction review and dust-control permits come into play on exterior work. Refacing is interior, so it rarely hits those rules, but it’s the kind of thing that catches out-of-town crews off guard. You can read more about how we handle county requirements on our home page.
How the Written Change-Order Process Protects Your Number
This is the part that matters most, and it’s the reason a Barrett & Sons quote tends to be the number you actually pay.
- We inspect before we quote. The substrate check happens up front, so we know what we’re bonding to.
- Everything goes on paper. Scope in writing, allowances in writing. If we expect substrate repair, it’s a line item, not a surprise.
- If the inspection finds something new, we write it down first. The scope and cost change on paper, before a single door comes off. You approve it before we proceed.
- No surprise invoices. An allowance that isn’t on paper is a surprise waiting for a date. We don’t run a job that way.
Every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right inside that window, one call brings us back to make it right. And a live person answers the phone around the clock, not a voicemail box.
FAQs
Refacing kitchen cabinets in Paradise typically costs $4,000 to $13,000 for a 10-15 linear-foot kitchen, with the low end around $4,000-$6,500 for a sound-substrate job and the high end near $9,500-$13,000 when substrate repair or new drawer boxes are needed. Call (855) 596-7029 for a free estimate on your exact kitchen.
Yes, refacing usually costs less than full cabinet replacement because the boxes stay and only the doors, drawer fronts, and veneer change. Replacement runs higher because you’re paying for new boxes and installation. If your boxes are too damaged to reface, though, we’ll show you both numbers in writing so the comparison is real, not a sales pitch. Call (855) 596-7029 to talk it through.
They can. Thermofoil is a vinyl skin that tends to peel and bubble at high cabinet temperatures, which is exactly what happens above a range or oven in a desert kitchen. That’s why we install KraftMaid components with real wood dovetail drawers and matching door profiles instead. Ask us to walk you through the material options, free of charge, at (855) 596-7029.
Usually not, since refacing is a finish upgrade. But if the project touches electrical like undercabinet lighting or new outlets, or plumbing like a relocated sink, Clark County requires permits for those sub-trades. We pull every one and get the inspections signed. Call (855) 596-7029 and we’ll tell you what your job needs.
Get Your Refacing Number in Writing
If you’ve been burned by a quote that changed at the door, this is the process built for you. We inspect the boxes, put the scope and the price on paper, and pull the permits. Then we back it all with the 90-Day Done Right Promise. Call (855) 596-7029 for a free estimate, and we’ll give you a second opinion on any written quote you already have at no charge.
Written by the team at Barrett & Sons Construction Paradise, serving Paradise, NV.
What Our Customers Say
"His sons run the crews and they were in our house for four months. Not once did I feel I had to be home to keep an eye on things."
- Camila Fuentes"Beautiful work and honest pricing throughout. The project ran about three weeks past the estimate waiting on the cabinets, which was the supplier rather than him, though the delay was still real."
- Genevieve Ashcombe"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."
- Thaddeus Oyelowo












