







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Paradise Homeowners Choose Toto Construction
We handle Toto fixture work in Paradise as part of full bathroom and kitchen builds: setting Drake and Ultramax toilets, wiring Washlet-ready outlets, and fitting Toto sinks and faucets into the cabinets and tile around them. As an independent Toto service provider, we are not affiliated with or authorized by Toto, which is exactly why we can fit and repair the fixture to your room and your budget instead of pushing a brand program. Call (855) 596-7029 for a free estimate on Toto work anywhere in Paradise.

Why Trust Barrett & Sons Construction Paradise for Your Toto Construction?

Toto builds a good fixture. The parts inside it still wear, and the water in Paradise is hard enough to speed that up. Our technicians have up to 28 years of experience, and a fair share of those years have gone into Toto work specifically: reading the model tag under the tank lid before ordering anything, knowing that a Drake CST743 and a Drake II CST454 take different fill valves, and understanding why a Vespin II’s skirted base means the rough-in has to be checked before a single tile is laid.
We use Toto OEM fill valves, flappers, Washlet inlet screens, and nozzles where fit matters, and quality aftermarket seals and supply lines where it doesn’t. That split is deliberate. A Toto fill valve is machined to a specific height and shutoff point, and a generic valve in the same tank will run, whistle, or cycle. Warranty-safe work means matching the part to the fixture and keeping the install documented.
Every eligible job gets permits pulled and inspections signed. Every scope change arrives as a written change order before work moves. That’s the 90-Day Done Right Promise, written on the contract, one call brings us back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Paradise
These are the Toto issues we see most often in Paradise bathrooms. Most trace back to water quality, wear, or an install that never matched the fixture.
- Washlet seats that stop heating or spraying (S500e, C5, K300). The inlet screen clogs with hard-water scale, and the unit shuts down to protect itself. Paradise’s mineral-heavy municipal and well-blended water makes this a routine call rather than a fluke. Clean or replace the screen and nozzles before anyone condemns the seat.
- Drake and Drake II fill valves that run, whistle, or won’t shut off (CST743/CST454, TOTO 528/ThinLine style). Scale builds on the valve seat, the valve can’t seal, and the tank cycles all night. A Toto-spec fill valve fixes it. The wrong valve will not.
- Flapper and flush-tower wear on Drake and Ultramax. A worn flapper or a tired tank-to-bowl gasket produces ghost-flushing and silent leaks you only notice on the water bill. It’s a small part with an outsized cost if ignored.
- Skirted Vespin II and Ultramax clogging and cracks. The skirted trapway and rim jets collect hair and scale, and the glazed ceramic can hairline-crack where the skirt meets the floor. A cracked skirt is a replacement; a clogged trapway is not.
- EcoPower and commercial-style flush-valve toilets. Sensor and valve assemblies drift out of calibration over time, and sediment in the supply line throws off flush volume. These need a diagnostic before parts are ordered.
A Toto Drake whose tank keeps running or ghost-flushing usually has a worn flapper or a scaled fill valve. The fix is to shut off the supply, drain the tank, and swap the Toto-spec fill valve and flapper while checking the tank-to-bowl gasket. On a Washlet that has quit heating or spraying, the inlet screen and nozzles are typically scaled up, so the parts get cleaned or replaced and the GFCI outlet and water supply get verified before the unit is written off. In a bathroom remodel, the same work sets the Toto toilet and sink so the rough-in, flange, and shutoff line up with the new tile and vanity cabinetry.
Toto Parts & Our Repair-vs-Replace Approach

We don’t stock Toto parts locally. Parts get sourced per job, matched to the model tag, and confirmed before we touch the fixture. That keeps the part right instead of “close enough.”
Repair is usually the honest call. A Drake with a running tank, a Washlet with a scaled screen, an Ultramax with a tired flapper: all of those are worth fixing with correct parts, and the fixture will run for years after. Replacement makes sense in two cases. The glazed ceramic is cracked, or the Washlet electronics board is dead and out of production. We’ll tell you which situation you’re in, in writing, before work starts. Call (855) 596-7029 for a free second opinion on any written estimate you’ve already got.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We read the model tag (CST743, CST454, Vespin II, Washlet serial), test the fill valve, flapper, tank-to-bowl seal, and, on Washlets, the inlet screen, nozzles, GFCI outlet, and water supply. We photograph the setup before we touch it.
- 2
Repair or install. OEM Toto parts where fit matters, quality aftermarket elsewhere. In a remodel, we check rough-in, flange height, and shutoff location against the new tile and vanity before the toilet and sink go in.
- 3
Test. Full flush cycle, tank refill, no ghost-flush overnight, Washlet heat and spray verified, supply connections dry. We don’t leave until the fixture behaves.
- 4
Warranty. Every eligible job is backed by the written 90-Day Done Right Promise. If something’s off, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Paradise
We work on the Toto lines Paradise owners actually own. That includes the Drake and Drake II two-piece toilets (CST743 and CST454 series), the Ultramax II and Vespin II one-piece skirted toilets, the Washlet and Washlet+ bidet seats (S500e, C5, K300), the Soiree and Clayton rimless and undermount bathroom sinks, and the EcoPower flush-valve line. We service the fixtures you have and install the ones you’re adding. If your model isn’t on that list, call with the tag number and we’ll confirm.
We Also Service These Brands
Barrett & Sons Construction Paradise is multi-brand, not single-brand dependent. We install and service KraftMaid cabinetry, Kohler plumbing, GAF roofing, and PGT windows and doors, and we tie Toto fixtures into those builds so the whole bathroom or kitchen works together. One crew, one written scope, one point of accountability.
FAQs – Toto Construction Service in Paradise
No. We are an independent Toto service provider and are not affiliated with or authorized by Toto. That independence means we fit and repair Toto fixtures to your room and budget rather than following a manufacturer program. Call (855) 596-7029 with your model number and we’ll confirm what we can do.

Yes, where fit matters: Toto OEM fill valves, flappers, Washlet inlet screens, and nozzles. We use quality aftermarket seals and supply lines elsewhere, because those don’t affect fit or function the way a fill valve does. Every part is matched to your model tag before we order it.
Most Toto repairs (running Drake, scaled Washlet screen, worn flapper) are a single visit, often under two hours once parts are in hand. Parts are sourced per job, so timing depends on the model. Toto installs inside a bathroom remodel follow the remodel schedule. Call (855) 596-7029 for a free estimate and a realistic timeline.
Drake and Drake II two-piece (CST743/CST454), Ultramax II and Vespin II one-piece skirted, Washlet and Washlet+ seats (S500e, C5, K300), Soiree and Clayton sinks, and the EcoPower commercial-style line. If you’re unsure of your model, read the tag inside the tank lid and call it in.
Correctly matched Toto OEM parts and documented service do not void a Toto warranty. Improper parts or unrecorded repairs can. That’s why we use OEM where fit matters and write every scope and part on paper before work starts. Call (855) 596-7029 to schedule service that stays inside warranty.
Toto fixture work is priced line-by-line within the surrounding bath job. Small bathroom remodels in Paradise run $5000 – $12000, full bathroom remodels $9000 – $28000, bathroom vanity installation $800 – $3000, and walk-in shower installation $4500 – $12000. Standalone Toto repairs are quoted individually. Call (855) 596-7029 for an exact quote. Estimates are free, and the free second opinion on any written estimate is standing.
| Toto Bath Service in Paradise | Typical Range |
|---|---|
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Yes, and it’s the right time to do it. Adding a Washlet during a remodel lets us run the GFCI outlet and confirm the water supply at the fixture before tile goes in. Retrofitting later means finding an outlet and supply after the walls are closed. Call (855) 596-7029 to plan the outlet and supply in your scope.
A running Drake is almost always a worn flapper or a scaled TOTO 528/ThinLine-style fill valve that can’t seal. Paradise’s hard water speeds that up. Shut off the supply, drain the tank, and swap the Toto-spec fill valve and flapper while checking the tank-to-bowl gasket. Call (855) 596-7029 if you’d rather we handle it.
Usually yes. A Washlet that quits heating or spraying most often has a scaled inlet screen or clogged nozzles, not a dead board. Clean or replace the screen and nozzles, verify the GFCI outlet and water supply, and the unit often comes back to life. Call (855) 596-7029 for a diagnostic before you replace the seat.
Yes. A skirted Vespin II hides the trapway, so the rough-in, flange height, and floor cut have to be exact before tile goes down, and the skirt base has to sit flat against the finished floor. Get that wrong and the toilet won’t seat cleanly. Call (855) 596-7029 so the tile and rough-in are planned together.
Yes. Toto Soiree and Clayton sinks drop into most standard vanity tops, and we set the faucet, drain, and supply at the same time as the cabinet install. We confirm the sink cutout and faucet drilling against the vanity top before ordering. Call (855) 596-7029 to price the vanity and sink together.
Book Your Toto Service in Paradise, NV
Whether your Drake is running, your Washlet has quit heating, or you’re planning a full bath remodel around a Toto toilet and vanity, we’re here. Every eligible job gets permits pulled, written change orders, and the 90-Day Done Right Promise. Call (855) 596-7029 to schedule a free estimate in Paradise. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Paradise.












