







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Does a General Contractor Do in Paradise, NV?
A general contractor plans the job, pulls the permits, schedules the trades, and stays accountable until final inspection passes. In Paradise, that means a GC pulls Clark County permits rather than city permits, manages SNO dust-control obligations on larger ground-disturbing work, and on projects near the airport corridor sometimes coordinates FAA height review. That government-side work is invisible on most homeowner timelines, and it’s usually what decides whether a project finishes on schedule or sits in a plan-check queue. Barrett & Sons Construction Paradise builds every eligible job with permits and inspections written into the scope from day one. Call (855) 596-7029 for a free estimate.
Key Takeaways
- In Paradise, permits come from Clark County, not a city hall, because Paradise is an unincorporated township.
- Ground-disturbing work over the threshold acreage triggers a Stormwater Notice of Intent (SNO) permit and on-site Best Management Practices the GC documents.
- Every scope change should arrive as a written change order before the work happens.
- Projects near Harry Reid International may need an FAA Form 7460-1 obstruction filing even on private lots.

How Paradise’s Jurisdiction and Climate Shape the Job
Paradise isn’t a city in the paperwork sense. It’s a large unincorporated urban-services township stitched from resort corridors and master-planned subdivisions, so construction here runs under Clark County rules instead of a city building department. The housing stock is mostly stucco-and-tile-roof tract homes built from the 1990s into the 2010s, plus mid-rise resort and condo towers and big-box commercial along the Strip and Convention Center area. Very little here predates the 1970s, which means the work skews toward remodels, tenant improvements, and new build-out rather than old-house reconstruction.
The desert decides a lot of the schedule too. Long stretches over 100°F push roofing, stucco, and concrete pours into pre-dawn or night hours because daytime heat compromises curing. Monsoon-season flash-flood risk and expansive soils that swell and shrink with the seasons affect slabs and foundations, and those conditions get factored into how a GC sequences the trades. None of that shows up in a generic “what does a GC do” explainer, but it’s half of the job here.
What to Look For: A Comparison of Who’s Actually Running the Job
Before you compare bids, compare the license, the contact, and the permit promise. Here’s how the choices stack up:
| What to check | Owner-operated, name-on-the-truck GC | Out-of-state or franchise outfit |
|---|---|---|
| Who answers the phone | A live person, day or night | Call center or voicemail |
| Who’s on site | The owner and his crew most days | Rotating contract labor |
| Price changes | Written change order before work moves | Verbal “we’ll square it up at the end” |
| Permits | Pulled on every eligible job | Often called “optional” |
| Guarantee | Written 90-Day Done Right Promise | Fine print, unclear callback |
That first row is why our readers tend to find us in the first place. Our technicians have up to 28 years of experience, and Barrett & Sons Construction was founded in 1998 as an owner-operated company: the owner’s sons run the crews, so the people on your job are people you’ll see again at the hardware store. The permit inspector works for you, not for us, which is why we want him on the job. Take a look at our home page to see how we structure a project from first walkthrough to final sign-off.

The Permit and Inspection Sequence Nobody Explains
Clark County residential and light commercial jobs move through the same basic steps, and knowing the order is what keeps a build out of re-inspection. A missed inspection step can require destructive re-inspection, which means opening walls to prove something that was already correct.
- Plan check. Drawings and scope go to the county for review. Corrections come back as comments you answer in writing.
- Permit issuance. Once the plan check clears, the permit is pulled and posted on site.
- Milestone inspections. Foundation or slab, framing, rough-in (electrical, plumbing, mechanical), insulation, and drywall. Each one has to be scheduled in order, and the next step can’t proceed until the previous one signs off.
- Final inspection. The last sign-off closes the permit and clears the project.
A GC’s job is knowing which inspection to call and when. Get the framing inspection wrong and the rough-in inspection stalls behind it, which pushes drywall, paint, and finish work by a week or more. On additions and ADUs, that sequence is the schedule.
What is the SNO dust-control permit, and who handles it?
An SNO (Stormwater Notice of Intent) permit is a Clark County dust-control obligation triggered by ground-disturbing work over a set acreage threshold. The GC obtains it, puts Best Management Practices in place on site (watering, track-out control, covered stockpiles), and documents compliance for the county. That’s an administrative and cost function that belongs to the contractor, not the homeowner. Skip it and the county can stop the job. We build it into the scope on driveway, patio, addition, and ADU work from the start.
Does my Paradise project need FAA review?
Sometimes, yes. Projects within the approach corridors around Harry Reid International that exceed certain heights can require an FAA Form 7460-1 obstruction advisory filing, even on a private residential lot. Projects near the Strip and airport corridor run into this more than people expect. A GC who doesn’t know the rule leaves the homeowner exposed to a stop-work order after the foundation is poured. If your lot sits in that corridor, that filing goes on the checklist before the first permit is pulled.
What Does a General Contractor Charge for Common Paradise Projects?
Pricing depends on scope, materials, and how much of the county process the job triggers, but these are the ranges homeowners in Paradise see most often:
| Project | Typical range |
|---|---|
| Kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Bathroom remodel | $9,000-$28,000 |
| Walk-in shower installation | $4,500-$12,000 |
| Roof replacement | $8,000-$20,000 |
| Window replacement | $4,500-$15,000 |
| Home addition | $45,000-$130,000 |
| ADU construction | $90,000-$220,000 |
| Paver driveway installation | $7,000-$18,000 |
| Concrete driveway installation | $4,500-$12,000 |
Brands matter to the number and to the finished result. We install KraftMaid and Cambria in kitchens, GAF and CertainTeed on roofs, Andersen and Marvin on windows, Belgard and Techo-Bloc on hardscapes, and Kohler and Moen in baths. These are materials you can look up, not mystery brands off a van. Explore our kitchen remodeling and bathroom remodeling pages to see how allowances get written.
Why the Written Change Order Is the Whole Ballgame
An allowance that isn’t on paper is a surprise waiting for a date. A GC’s job includes documenting every scope change, every material substitution, and every allowance adjustment in writing before it happens. That’s not a courtesy; it’s the mechanism that protects you from a final invoice that’s bigger than the bid. Every scope, every allowance, every price change arrives as a written change order on our jobs, and every completed job is backed by the written 90-Day Done Right Promise. One call brings the owner back if something isn’t right.
We pull every eligible permit and coordinate every inspection as part of the standard scope, not as an add-on. Permits exist to protect your investment, and skipping them is a risk that follows the property through every future sale. Current standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. If you’re weighing a home addition or ADU near the resort corridor, that’s the conversation to have before drawings start.
FAQs
For a cosmetic job, sometimes no. For anything that touches framing, electrical, plumbing, or the exterior envelope, yes, because the work triggers county permits and inspections that a handyman can’t legally pull or sign off. A bathroom remodel or a kitchen with moved plumbing almost always crosses that line. Call (855) 596-7029 and we’ll tell you honestly which side your job falls on.
Most Paradise homeowners spend between $9,000 and $45,000 on a remodel, $8,000 to $20,000 on a roof replacement, and $45,000 to $130,000 on a home addition, depending on scope and county process. Exact pricing comes from a written estimate after a walkthrough. Every estimate includes a free second-opinion review if you’ve already got one in hand. Call (855) 596-7029 for an exact quote.
The permit problem follows the property, not the contractor. Unpermitted work can surface during a future sale, an insurance claim, or a county complaint, and fixing it often means opening finished walls for inspection. That’s why we pull every eligible permit and coordinate every inspection as standard scope. If you’re unsure whether past work was permitted, we can check before you buy or sell.
Yes, and we plan for it. Concrete pours and exterior work get scheduled at pre-dawn or night hours during long stretches over 100°F, since daytime heat compromises curing. Roofing, stucco, and paver work get sequenced around monsoon flash-flood risk and the expansive soils that move with the seasons. That scheduling is part of the GC’s job here, not something you should have to manage.
If you’d rather have it looked at, Barrett & Sons Construction Paradise offers a no-pressure assessment in Paradise. Call (855) 596-7029 for a free estimate, and we’ll walk your scope, your permits, and your timeline before anything gets signed.
Written by the team at Barrett & Sons Construction Paradise, serving Paradise, NV.


